What Type Of Card To Use When Downloading Updates On My Clrion Raido

NX501A Software Update Instructions (for OS)

1-i.You volition need a blank MicroSD Card which has a capacity of more 64MByte.

(You cannot use the 4G Micro SD card that came with the NX501A. If you practise, it will void your warranty and you will need to purchase a replacement card.)

1-two.Delight download the "NX501A-Asia_OS.nix" file from download folio and relieve to your computer.

i.3.After the download is completed, you will need to unzip the "NX501A-Asia_OS.cypher" file using WinZip(http://www.winzip.com/downwz.htm).

Please excerpt the following files, and then copy all files to the bare MicroSD Carte du jour.

Files: chain.bin, chain.lst, logoup.bmp, NK.bin, sysupdat.ini, TINYNK.bin

Notation: Before you first the update procedure, please disconnect whatever USB Device which is currently connected.

During the software update, exercise non turn the Power Off on the unit.

ii-one.Please press the Volume knob until NX501A shuts down.

two-2.With the NX501A powered off, please take out the Navigation microSD Card which is currently in the MicroSD Card Slot.

Note: The Navigation Map data is independent in the microSD Card. Please be careful and do non lose or misplace this microSD Card.

Then insert the MicroSD Card which has the six files into the MicroSD Card Slot.

2-iii.With the MicroSD Carte du jour which contains the six files inserted into the NX501A, please push button the Volume Knob.

2-4.NX501A will start OS software update automatically.

Please do not unplug, disconnect or ability Off the NX501A until the update has been completed. This portion of the update will have virtually two minutes to consummate.

NX501A_Updates(OS)-1

two-5.When the software update is completed, NX501A close information technology down automatically and start with Radio mode.Please press the Volume knob until NX501A shuts down.

2-6.With the NX501A powered off, please accept out the MicroSD Card which contains six files.

2-7.Please re-insert the Navigation MicroSD which was taken out in pace ii-two.

ii-eight.Please restart NX501A by pushing the Volume knob.

3-1.With the NX501A powered on, delight touch the MENU Push which is located at the top left corner of the NX501A.

3-2.Please touch the "Setting" button (Touch panel button at the bottom of the right side of the screen)

3-three.Please scroll to the end of Full general detail.

3-4.Please bear on the "Version" button (Impact panel push button)

3-v.Delight confirm the following version.

NX501A-Asia-1-2